Select Project dialog

This dialog appears if you do the following:

1. Set up a Data Receiver module.
2. Specify a connection using the Settop M1 file based connection type.
3. Specify a Settop M1 device by its IP address.
4. Set the focus onto the Project name setting and click the browse button.

Use the dialog for automatically requesting the list of projects and for selecting a project for download. The last round measurement stored for this project will be downloaded when the Data Receiver module using this connection type successfully connects to the Settop M1 device.

When you access the Select Project dialog, the module connects to the specified Settop M1 device and requests the list of projects. As result, the Select Project dialog displays all projects by their project name and their creation dates.

Selecting a project

For selecting one of the projects, set the focus onto the respective list item and accept with OK.