|
|
|
|
|
The Instrument Manager module provides the Schedule Overview module-view. This view shows all active schedules and their conflicts. For a schedule of a Data Collector to appear in this view, it has to be enabled.
Tip - To view the properties of any module, activate the module in the list and select its shortcut menu command Properties.
The legend shows the color assignment to total stations and lets you select total stations for display. Total stations are identified by their serial numbers. By default, the display of all total stations is selected.
Use the check boxes to enable or disable the display of the scheduled times for all Data Collectors which are connected to a specific total station.
The diagram displays for each enabled Data Collector module with an active scheduler the scheduled measurement times. The scale of the time axis depends on the selected Chart Data Properties > Time span property value.
Data Collector modules representing the same physical total station are identified by the same color.
If the Instrument Manager detects a conflict in scheduled times, the bar of the Data Collector module with lower priority shows a stripy pattern for the time of conflict.
For the Schedule Overview chart, chart properties are available.
For the Device Manager chart views additional properties exist.
The chart Properties appear if you right-click into the graphic of any module and select Properties. One of the following happens:
For a description of the settings of the Chart Properties and Chart Data Properties categories see the discussion of the General chart properties.
Show conflicts: Applies specifically to the Instrument Manager Schedule Overview. By default set to No - conflicts will not be marked. If set to Yes, the Schedule Overview module-view displays conflicts of scheduled measurement times for all Data Collector modules which are connected to it.