Select Calibrated Site dialog

This dialog appears, if you do the following:

1. Do one of the following:
   • If your currently selected coordinate system is Default:Default: Select the main menu command File > System Properties, set the focus onto the Select coordinate system setting and click the browse button.
   • If your currently selected coordinate system is a different one: Select the main menu command File > System Properties, set the focus onto the Select coordinate system setting and click the browse button. The Select Coordinate System dialog appears. Click New System.

   The Select Coordinate System Type dialog appears.

2. Select Calibrated Site and click Next.

Use the dialog to select a calibrated site that you want to use from the list of available sites.

Calibrated Site selection

A site is a set of coordinate system parameters that has been saved in the system database for later use. A site can include horizontal and vertical adjustments from a site calibration. The default system database current.csd does not contain calibrated sites. For adding calibrated site information to the database, use the Coordinate System Manager utility.

Site Details: Displays the coordinate system information, on which the site calibration is based on. For more details on the calibrated site properties, right-click the site name.

For selecting a calibrated site as coordinate system, set the focus onto its name.

Properties of an item

To view the properties of the selected coordinate system group or zone, right-click its name to access the shortcut menu. Select Properties. This opens a properties read-only dialog, which displays the parameters of the selected items.

Next step

Click Finish. The basic coordinate system group and zone are displayed in the System Properties dialog.