|
|
|
|
|
The Select Combined GNSS Stations and Optical Points dialog appears, if you add an Integrated Survey Engine module to the system or change its properties, then set the focus onto the GNSS and optical points value field and click the browse button.
The dialog consists of three list fields: On the left appear the available GNSS stations. On the right list, the total station and target points used for the selected mission are listed. The list in the middle shows for the selected GNSS station the point that is assigned to it. For stations which do not have assigned points, the list is empty. When you first open the dialog, no point is assigned to any station.
Use the dialog to specify which GNSS stations have optical points assigned and thus contribute to the combined system that is processed by this Integrated Survey Engine. You can easily recognize existing assignments by the 
icon in front of the list entry.
To add a new assignment, select a GNSS station on the left and an optical point on the right. Click the left-arrow button and shift the local point over to the assigned points list.
To remove existing assignments, select the respective GNSS station, select the point in the middle list and press the right-arrow button to disjoin this point.
By default, no point is assigned to any station.