|
|
|
|
|
The Select GNSS Processing Engine dialog appears, if you add an Integrated Survey Engine module to the system or change its properties, then set the focus onto the Selected GNSS processing engine value field and click the browse button.
Use the dialog to specify which GNSS processing module contributes to the combined system that is processed by this Integrated Survey Engine. All GNSS processing modules defined in the system are listed in the selection field, displaying their configuration name. For each Integrated Survey Engine, only one GNSS processing engine can be selected and will contribute its baseline results to the combined solution.
To select a GNSS processing engine from the alphabetically sorted (according to the configuration name) list, select the respective check box.
By default, no GNSS processing module is selected.