|
|
|
|
|
The Data Logger Measurements view displays the values of the latest measurement extracted from the most recent data acquisition operation by the Data Logger module. This enables the user to get a rapid overview of the measurements being extracted from each geodetic sensor in the system.
Measurement entries are grouped by sensor type. For a detailed description of the columns of each sub-table see the following table. By default, all available columns are shown. To view a different selection of columns, right-click into the view; from its shortcut menu, select Choose Columns. Then edit the Choose Columns dialog.
The information field on top of the view holds information on the date and time of the acquisition of the data.
Group header |
Description |
|---|---|
Tilt |
Available, when sensors with data type ‘Biaxial Tilt’ or ‘Uniaxial Tilt’ are added to the Data Logger module. Displays the latest tilt measurement for each individual tilt meter in decimal degrees of deflection from the initial reference measurement. |
Temperature |
Shows the latest temperature values as returned by all sensors measuring their internal temperature. In degrees Celsius. |
Pressure |
Available, when sensors with data type ‘Pressure’ are added to the Data Logger module. Displays the latest pressure measurement for each individual sensor in kilopascals. |
Voltage |
Displays the latest battery voltage returned by all sensors measuring their internal battery voltage. In Volts. |
Column |
Description |
More Information |
|---|---|---|
Health |
Icon visually describing the health status of the sensor. |
|
Sensor Name |
Sensor identification by its name. |
Specified using the module properties. |
Measurement |
Measurement value. |
Values are presented in SI units. |
Sensor Failure Alarm |
Has an alarm been issued? |
One of the following: |
The data set received for the last epoch is complete.
Some expected data is missing. 
No data for this sensor in the data file.