Data Logger Status view

The Data Logger Status view summarizes the status of the measurements extracted from the most recent data acquisition operation by the Data Logger module. For a detailed description of the columns in the spreadsheet see below. By default, all available columns are shown. To view a different selection of columns, right-click into the view; from its shortcut menu, select Choose Columns. Then edit the Choose Columns dialog.

Information on the data acquisition time

The information field on top of the view holds information on the date and time of the acquisition of the data.

The table: All available columns

Column	Description	More Information
Health	Icon visually describing the overall health status of the sensor.	Healthy: Sensor is operating correctly. The sensor did not deliver data for one of its parameters. No data for this sensor in the data file.
Measurement Type	Icons show the measurement types returned by the particular sensor.	Among others, these icons for measurement types may appear: Voltage Pressure Temperature Tilt
Sensor Name	Sensor identification by its name.	Specified using the module properties.
Sensor Serial Number	Sensor identification by its serial number.	Specified using the module properties.
Manufacturer	Manufacturer name.	Specified using the module properties.
Description	Text message.	A short description of the action taken by the Data Logger module during the data acquisition process from the data file. Warning messages are posted here advising of any problems that may have been encountered during the data acquisition process.