Enabling the Data Logger IPI module

Once the Data Logger IPI module has been configured and sensor information has been added to the module, it is necessary to enable the module.

Enabling the module

For enabling the module and to start reading in the data from the data file, do one of the following:

• In the Tree view, right-click the module name to open its shortcut menu. Select the Enable File Import command.
• Using the Data Logger IPI properties, go to the File category / Enable property and set it to Yes.

Once enabled, the Data Logger IPI icon in the tree view will switch to .

Disabling the module

For disabling file processing, do one of the following:

• In the Tree view, right-click the module name to open its shortcut menu. Select the Disable File Import command.
• Using the Data Logger IPI properties, go to the File category / Enable property and set it to No.

In the disabled state, no data will be retrieved for this Data Logger IPI module. The Data Logger IPI icon will switch to .