Exporting station data to IGS site logs

There are two modes of exporting station to IGS site log files:

To start the export of all station data to IGS site log files, do the following:

From the main menu, select File > System Properties. The System Properties dialog appears.
Set the focus into the Station information value field and click the browse button. The Station Information dialog appears.
Select Export > IGS Site Log Files. The Browse for Folder dialog appears with the last selected folder pre-selected. Select the folder, where the station data files shall be created in. The station data of all stations in the global station list will be exported to automatically created files, one file per station.

Trimble 4D Control Server supports the export of module-related subsets of the station data for the following modules:

Data of all stations used by GNSS Receiver and NMEA Receiver modules added to the selected Device Manager module(s). If the same station is used by a GNSS Receiver module and an NMEA Receiver module, the NMEA Receiver will not be respected.
Station data of all GNSS Receiver modules selected for the selected Synchronizer module(s), which are currently connected to the system.
Station data of all NMEA Receiver modules selected for the selected NMEA Engine module(s), which are currently connected to the system.

To start the export of sub-sets of station data to IGS site log files, do the following:

Select one or several of the modules listed above and right-click to open a shortcut menu.
Select Export IGS Site Log Files. The Browse for Folder dialog appears with the last selected folder pre-selected. Select the folder, where the station data files shall be created in. The station data of the stations related to the selected modules will be exported to automatically created files, one file per station.