Previous Topic

Next Topic

Book Contents

Book Index

Priority Settings dialog: Conflict detection and resolution

This dialog appears if you do the following:

Only one Data Collector module can connect to a specific total station at the same time. If multiple Data Collector modules connect to the same total station, it is necessary to set priorities to resolve such a conflict.

The following may happen:

If you insert a new Data Collector, it gets the lowest priority. Use the Priority Settings dialog to change the priorities of connected Data Collector modules.

Total Stations list field

Displays the serial numbers of available total stations

Data Collectors list field

Displays the configuration names of the Data Collector module with specified connection to the total station displayed in the Total Stations list field and in order of their current priority.

Arrow down button

Moves the selected Data Collector module downwards in the list. This module will get a lower priority.

Arrow up button

Moves the selected Data Collector module upwards in the list. This module will get a higher priority.

See Also

Instrument Manager

Instrument Manager Properties - General Settings