Selections at the Tree view

The Tree view offers single and multiple selection in both, the Module and the Controller view modes. Selected modules are highlighted.

• To select a single module, set the focus onto it.
• To change the selection by moving the focus up and down, use the cursor up/down keyboard buttons. The cursor left/right keyboard buttons change to the upper (left) or lower (right) hierarchy level.
• To add another module to the selection, hold the Ctrl key while setting the focus. To enhance this selection, again use the cursor up/down keys.
• To select all modules between the previous and the current selection, hold the Shift key.

Note - If a tree node is closed, its child objects will not be selected.

The last selected module always is the activated module. There is always only one activated module. The activated module is displayed in the view area.