External Sensor Commands dialog

This dialog appears if you do one of the following:

• Add the GNSS Receiver module for specific receiver types. The GNSS Receiver Properties dialog appears with the External Settings tab. Set the focus onto the Commands setting and click the browse button.
• Select the GNSS Receiver module in the Tree view. The categories and settings of the External Settings category tab appear in the Properties view.

Use the Commands dialog to view and edit command strings to be sent to the sensor.

Enter the strings in the Command fields and schedule the repeat times for each string in the Schedule selection field next to the respective string. For scheduling an initial string and for testing the connection select the scheduling option Once.

Tip - For information on initial and repeat strings refer to the operating manuals of the sensors.