Post Processing Engine Processing Status view

The Post Processing Engine Status view gives you information on the current status of processing. It displays an overall summary on the current or following session.

Post Processing Session group

This group displays the period the next session to be processed covers and the remaining time until processing starts. If the time field displays the < 10 seconds value, the data is going to be processed. For actions, see the Processing Status group.

Processing Status group

The Processing Status group displays the current status of the Post Processing Engine module. At session start time, the module performs the following and checks the respective list row after the tasks have been carried out:

Scanning folder
Establishing baselines
Processing baselines (see the progress bar)

Note - How often the progress bar updates depends on the bandwidth control setting you have selected when logging in to the Trimble 4D Control Server UI. If the bandwidth is controlled or restricted, the progress bar updates once for each baseline.

After processing, it lists the number of baselines being processed. Possible reasons for a baseline to not being processed include the following:

Change of the Maximum baseline length setting.
Change of the Use redundant baselines setting.
Missing orbit data.
Missing observation data.

The table of the Post Processing Engine Status view gives an overview of the results of all baselines the module has processed. The results include the fixing status and solution type. The view displays the current offsets (D) between the given and the processed baseline vectors (displacements) in numerical form.

The elements shown in the table

Column	Description	More Information
Baseline	<Base> - <Station>	The baseline vector is defined by the starting (Base) and aiming (Station) reference station. Stations are indicated by their unique Station codes.
Length	In meters	Calculated from the known positions.
Status	Status message
Solution	No position	No solution possible.
	No/Old RTK position fixes	Only after reset of calculation. No current solution possible, previous position fixes are kept.
	Float	RTK, Float solution.
	Fixed	RTK, Fixed ambiguities.
Orbit	Broadcast, Predicted, or both (Mixed).	Indicates which orbit types are used for processing.
Epochs	Per session	Number of epochs used for processing.
D Northing, D Easting, D Height	In meters	Uni-directional distances to the known positions of the "Station".
D 3D	In meters	Three-dimensional distance to the known position of the "Station".

Note - The results of the Post Processing Engine are baseline components, displacements, and errors. To get station coordinates, displacements, and errors, add an Integrity Monitor module to the Post Processing Engine. View the coordinates of fixed and adjusted (constrained) stations in its Current Displacements module-view.