Stopping and continuing post processing

To stop post processing:

1. Go to the Tree view and set the focus onto the Post Processing Engine module.
2. Select its shortcut menu command Stop.

   The module immediately stops performing its task, such as scanning the folders, establishing baselines, and processing. The tasks will not be performed anymore until you continue the process. If processing of a baseline was disrupted, the Status field in the table displays an according status message.

To resume the processing:

1. Go to the Tree view and set the focus onto the Post Processing Engine module.
2. Select its shortcut menu command Continue.

   The Post Processing Engine immediately resumes the previously stopped action and continues processing the stopped session and, if necessary, the following missing sessions. If the processing of a baseline has been interrupted, this baseline will be re-processed for the whole session period.