Apply Coordinate Values dialog

This dialog appears if you do the following:

1. In the Tree view, go to the Integrity Monitor item
2. Open the shortcut menu and select Calculate Coordinates and Velocities.
3. Select a period, a processing type and at least one station, and click Process.

Use the Apply Coordinate Values dialog to view the calculated coordinate and velocity values and to select the GNSS stations for which you want to apply them.

List of station coordinates and velocities

The list contains the newly calculated coordinates and velocities and their differences compared to the coordinates and velocities currently set for the station. Additionally, the reference time of the coordinates set in the station properties is displayed as well as the number of measurements taken into account for the calculations.

The list contains a row for each station for which calculation was successful. If there was not enough data to calculate a trend for a certain station, a message has appeared before. This station will be missing in the list.

Use the check boxes to select the stations for which the new coordinates and velocities will be applied. By default, no station is selected.

Select All / Select None buttons

The Select All button selects all stations for coordinate and velocity update, the Select None button disables all.

Apply button

Click the Apply button to apply the calculated coordinates and velocities to the selected stations. The coordinate and velocity values of these stations will be updated in the station list.

Note - All modules using the station positions for calculations will reset the calculation of the baselines or stations to which new coordinates are applied. The RTK Engine will reset baseline estimation for all baselines connecting the respective station to any other station.