|
|
|
|
|
When you add the In-Place Inclinometer module, the In-Place Inclinometer Properties dialog appears with this tab.
If you select the module in the Tree view after you have added the module, the categories and settings of this tab appear in the Properties view.
The General Settings tab presents you with the configuration properties of the In-Place Inclinometer (being either inserted or edited). All fields herein must be completed when inserting a new instance of this module.
The settings of this category specify the set of sensors adding to the total deflection value. All settings are required and only editable, when you are adding the module.
Tilt sensors: This property enables you to select and individually configure each tilt sensor from all tilt sensors connected to all Data Logger modules set up in your current Trimble 4D Control Server system. To select the tilt sensors, and to view and edit their respective properties, set the focus onto the Tilt sensors setting and click the browse button. This opens the Tilt Sensor Configuration dialog, which will additionally provide the facility to view and edit the initial tilt angles of the bi-axial inclinometers. After you have selected the sensors and optionally specified the initial tilts, the Tilt sensors value field displays the number of selected sensors and their configuration names.
Tilt sensors timeout: Use the edit field to specify a timeout threshold. If for a tilt sensor data is missing for at least the selected period, its health as well as that of the In-Place Inclinometer module will be set to the "Alert" status.