|
|
|
|
|
The Data Receiver Round Measurement view gives an overview of the measurements of the last round. The text box above the table indicates which round of a set of rounds is currently being measured. Additionally, it displays information on general round times and status, such as when the last round was started and has finished, or if and when it was aborted.
When a round measurement starts, the view fills up with all selected target points in the order as they have been selected for measuring (see the Round Settings properties). For a detailed description of the columns in the spreadsheet see the section below.
While a round is being measured, the sorting function according to column values is disabled.
Column |
Icon is ... |
Description |
|---|---|---|
Graphical target status icon, one of: |
Gray |
Not measured in this round. |
|
Blue |
Currently being measured. |
|
Green |
All differences are below the tolerance threshold; successful measurement in both faces. |
|
Red |
Failure |
Point Name |
|
Target point name. Must be the same in the global point list. Each point will be measured in two faces. |
Measurement Time |
|
Time of measurement, displayed in the selected time system. |
Face |
|
One of either 1 or 2. |
D EDM Distance |
|
Difference between the current measurement and the last round measurement for the distance of the prism from the Electronic Distance Measurement device. |
D Horizontal |
|
Difference between the current measurement and the last round measurement for the horizontal angle between total station and target. |
D Vertical |
|
Difference between the current measurement and the last round measurement for the vertical angle between total station and target. |
Status |
|
Status information, such as OK, Now measuring; Integrity check failed, Disabled, and others. |
(backsight point)
(other target)