Storage History View

For each file created within the last 24 hours, the Storage History view continuously displays important information, after the file has been finished. For a detailed description of the table columns see the table below.

Entries appear for all observation files created and stored at the specified folder. Therefore, original files, which are deleted after compression, do not show up in the history. Instead, their compressed versions are displayed. If compression without deletion of the original files is active, both files appear in the list.

All entries are derived from the system database and may be delayed up to 30 seconds.

All available columns of the table:

Column	Description	More Information
Status	File status. An icon visually displays the file status. Balloons symbolize files stored from data by the GNSS Receiver module. Flags symbolize files retrieved from the connected receiver through storage integrity Balloons with flags symbolize a second try where no additional epochs could be retrieved.	Possible states are: , 100 % availability of epochs , , >= 99 % availability , , >= 0 % availability Availability is the ratio between the number of currently available epochs and the number of epochs expected for the defined time period.
File	File name.
Type	Data type.	The type of data the file contains. Derived from the Storage type setting.
Written Epochs	Number of epochs written into the file.
Epochs Per File	Number of expected epochs.
Avg Sats	Number of satellites tracked.	Average from all epochs.

Start	Start time of the period written into this file.	GPS time.
End	End time of the time period written into this file.	GPS time.
Rate	Update rate used to write the file.	In seconds. Primarily derived from the Data rate setting at the Storage Properties - General Settings dialog. If, however, the receiver tracking rate is lower than the data rate, the actual data rate depends on the receiver tracking rate.
Path	Path to the file.	Includes the name of the computer.