Previous Topic

Next Topic

Book Contents

Book Index

Starting Up With Last System Configuration dialog

This dialog appears, when during startup of the Trimble 4D Control Server processes are already logged in with the Trimble 4D Control Server UI with user rights allowing the change of system configurations. If Trimble 4D Control Server has been exited with the default, empty system configuration (no modules added), it will start up without displaying this dialog.

Use the dialog to do the following:

The main list field displays for each container on all participating and connected computers the remaining time in seconds, until this Container will automatically be loaded. A Container is identified by the hosting computer name and the Container's IP port.

Loading or skipping the current system configuration

Loading another system configuration

To load a different system configuration, click Change. The Load System Configuration dialog appears. Use it to select another system configuration. The dialog closes and Trimble 4D Control Server immediately starts up loading the modules.

Individually loading or skipping the modules for specific Containers

Skipping the configuration load for a Container does not modify your system configuration (as long as you do not save it again), so it is only temporary. If you restart the skipped Container, it will load the previous configuration again.

See Also

Using system configurations