|
|
|
|
|
The Select Stations dialog appears, if you add an Integrity Monitor or High Rise module to the system or change its properties, then set the focus onto the Fixed stations value field and click the browse button.
Use the dialog to select one or several stations from the alphabetically sorted list of stations. Only stations used by the parent Synchronizer module are available for selection at the list field. To select a station, select the respective check box. There is no limitation to the number of selected stations. The All button enables all stations for the current configuration, the None button disables all. By default, no stations are selected.
Tip - When selecting stations for the Integrity Monitor adjustment, make sure to have at least one station and less than all stations selected before accepting. To simplify the selection, using the All and None buttons is nevertheless allowed.