|
|
|
|
|
Use the Device Info view to get an overview over the receiver types and connection configuration for all stations in the network. Station Name, Station ID, and Station Code, Receiver Type, Decoder Type and Decoder Communication Mode, Firmware and Serial Number, and the connection parameters summarized in the Connection Configuration column are all derived from the device settings. The overall status of the device status is identified by its status icon.
Tip - To view the properties of any module, activate the module in the list and select its shortcut menu command Device Properties.
If a connection to a module is not available due to, for example, a failure of the transmitting media, the receiver will be identified as Not available.
To view the properties of one or several devices while the Device Manager module is still selected in the tree, select the device(s) - multiple selection is possible - in the list. If the Properties view is not currently open, right-click into the list, from the shortcut menu select Device Properties.
To set the focus on a specific GNSS Receiver module in the Tree and to display its module view, double-click its entry in the list or right-click to open the shortcut menu and select the Go to GNSS Receiver command.
To remove a device from the system configuration, select the device(s) - multiple selection is possible - in the list. Right-click to open the shortcut menu and select the Remove GNSS Receiver command.