Select Data Types dialog

This dialog appears if you do the following:

1. Add the Data Logger module. The Data Logger Properties dialog appears with the General Settings tab.
2. Set the focus onto the Geotechnical sensors value field and click the browse button. The Geotechnical Sensor Information dialog appears.
3. Select an existing sensor in the list or add a new one.
4. Go to the sensor properties, set the focus onto the Data types value field, and click the browse button.

The Select Data Types dialog displays a list of data types. Use the check boxes of the dialog to view and edit the selection of data types that the sensor (selected from the list of sensors at the Geotechnical Sensor Information dialog) provides.

Among available data types are, for example, Pressure, Temperature, and Voltage; but also many others.

Depending on the selected data types more properties will become available in the Geotechnical Sensor Information dialog.