Previous Topic

Next Topic

Book Contents

Book Index

Enabling the Data Logger IPI module

Once the Data Logger IPI module has been configured and sensor information has been added to the module, it is necessary to enable the module.

Enabling the module

For enabling the module and to start reading in the data from the data file, do one of the following:

Once enabled, the Data Logger IPI icon in the tree view will switch to .

Disabling the module

For disabling file processing, do one of the following:

In the disabled state, no data will be retrieved for this Data Logger IPI module. The Data Logger IPI icon will switch to Icon Device is disconnected .

See Also

Data Logger IPI: Input of in-place inclinometer arrays

Data Logger IPI Properties - Data File Settings

Data Logger IPI views

Tree View