Accelerometer Manager Status view

The Accelerometer Manager Status view summarizes the status of the measurements extracted from the most recent data acquisition operation by the Accelerometer Manager module. For a detailed description of the columns in the spreadsheet see below. By default, all available columns are shown.

Information on the connection status

The Connection Status information field on top of the view holds information on whether the connection to the RTPD Server is established or not.

The table: All available columns

Column	Description	More Information
	Icon visually describing the overall health status of the sensor.	Healthy: Sensor is operating correctly: Data has been decoded, converted into ground units and all components (X,Y,Z) are present. The accelerometer data is incomplete. Not all components could be synchronized; for example, one component is missing. One of the following: No data for this accelerometer in the data stream. This status appears by default during initialization time, if you did not provide the sensor conversion data when setting up the module, and the system waits for the hourly sensor conversion data to arrive with the data stream. A No data alarm occurred. Channel information missing or incomplete.
Name	The name of the accelerometer	Specified using the module properties.
DAS ID	The unique unit ID of the DAS providing the accelerometer data stream.	Specified using the module properties.
Stream ID	The numeric ID of the accelerometer data stream.	Specified using the module properties.
Channels (X,Y,Z)	The numeric IDs of the channels in the order X, Y, Z channel.	Specified using the module properties.
Status Details	Text message.	A short description of the current status. Warning messages are posted here advising of any problems that may have been encountered during the data acquisition process.