|
|
|
|
|
The Select Reference Targets dialog appears, if you change the properties of a Terrestrial Engine RT, a Terrestrial Engine PP, or an Integrated Survey Engine module after at least one total station has been selected for distance or vertical angle corrections. Set the focus onto the Choose reference targets value field and click the browse button.
For correcting distance measurements or vertical angle measurements with the help of measurements to control points, use this dialog to select the control points to be used as reference points.
The list displays all points of the mission. To select a point, select the respective check box.
The All button selects all points, the None button removes all selections. By default, no point is selected as target.
Tip - When adding a Terrestrial Engine PP module to the tree or when there has been no JobXML file imported so far to it, this dialog will not show any points.