|
|
|
|
|
The Synchronizer Station Delay Chart view graphically displays the average delay per minute and / or per hour for this Synchronizer module. All times shown here are in the time system you have selected for the Trimble 4D Control Server system.
All charts show the same general behavior. They have a common set of chart options you can modify; you can switch data sets on and off as desired, you can zoom into them, you can save their contents to graphic or data files, and you can print them. For a detailed description of how to get the best out of the chart views see the Chart Views section of this Help.
The diagram displays in form of a line graph for the Synchronizer module the average delays per minute and / or per hour with the horizontal axis as time and the vertical axis as the delay time in milliseconds. The values refer to the module's delay in forwarding the epochs to the dependent modules. Delays are relative to the first station sending a specific epoch.
Vertical bars can additionally indicate the minimum and the maximum delay value that contributed to the mean value of each data point.
The delay time section between no delay (0 milliseconds) and a delay of 2000 milliseconds is colored in a light blue, while the section of higher delay times has a white background. Any station with delay times in the white sector is too late (yellow status icon in the Synchronizer Status view).
Use the Refresh button to reload the data from the database.