Router Manager Status view

The Router Manager Status module-view provides an overview of all Router module it manages. Each Router module added below the Router Manager module is represented by a row of entries in the list.

If a Router module owns depending Router modules, thus splitting its data, an additional table-in-table displays a row for each dependent Router module.

For a detailed description of the columns in the list table see below. To view a different selection of columns, right-click into the view; from its shortcut menu, select Choose Columns. Then edit the Choose Columns dialog.

Main table entries: All available columns

Column	Description	More information
Status icon	Indicates the different connection states of the incoming and the outgoing sides of the Router connection line.	See Router states.
Router Name	Router module configuration name.
Communication Mode	How does the Router module communicate with its data source?	One of Active Passive.
Backup Connection	Status of the backup connection.	One of: Enabled / Not running Enabled / Running Disabled
Incoming Connection	Type and settings of the currently active incoming connection.	With a backup connection enabled, this field shows the settings for the backup connection, if and as long as it is the active one.
Outgoing Connection	Type and settings of the outgoing connection.
Last Status Change	Status message.	A message that informs on the last change of the module status.
# Disconnects [1h]	Counter; how often has the module been disconnected during the last hour?
# Disconnects [24h]	Number of disconnects during the last 24 hours.

Table-in-table: Dependent Router modules

Router modules depending on a parent Router module do not need user-specified settings on their incoming connection or on a backup connection. Therefore, the table-in-table for these modules does not display this information.

Shortcut menu commands on Router modules

To view the properties of one or several Router modules, select the module(s) - multiple selection is possible - in the list. If the Properties view is not currently open, right-click into the list; from the shortcut menu select Router Properties.

To set the focus on a specific Router module in the Tree and to display its module view, select the module and right-click into the list. From the shortcut menu select Go to Router. Alternatively you can double-click the module entry.