Multipath Properties

The Multipath Properties appear if you do one of the following:

• If the Properties view is already displayed (either docked to the main window or floating): Set the focus onto the Multipath module-view.
• If the Properties view has not been opened yet: Right-click into the plot area to open its shortcut menu, then select Properties. The Properties view appears.

Use the Multipath Properties to view and edit the settings for the data this plot displays.

Multipath Properties category

Use the settings of this category to specify an upper value for the color range used for displaying the signal errors. Colors range from a dark green (0.0 m displacement by multipath effects) to a bright red (high multipath effects).

Code limit: Specifies the upper limit for the display of multipath effects referring to the code. Default: 0.5 m

Phase limit: Specifies the upper limit for the display of multipath effects referring to the phase. Default: 0.02 m