Station Selection dialog

The Station Selection dialog appears, if you add a Post Processing Engine, an RTX-PP Engine, or an Atmosphere Watch module in post processing mode to the system or change its properties, then set the focus onto the Selected stations value field and click the browse button.

Use the dialog to select one or several stations from the list of stations for processing.

All stations defined in the system are available for selection at the list field. For jumping to a specific station in a large list, enter the first character of the station name or of the station code (Example: For jumping to station "Paris", press "P"), alternatively the first number of the station ID. To select a station, select the respective check box. The All button selects all stations for the current module configuration, the None button disables all. For multiple selection, use the standard Windows selection options, then press the Space key. This toggles the Select status of all selected stations.

By default, no station is selected.

Sorting stations according to properties

Use the headers of the table columns to alphabetically sort the stations either according to their station ID, their station code, station name, or the configuration name of the parent Device Manager modules of stations that are selected for loaded GNSS Receiver modules. Stations which are not selected for any GNSS Receiver module currently loaded under any Device Manager within the system, are subsumed under "Not in use".

Changing station data

If you detect that you need to change the properties of a station, double-click anywhere on the row displaying the station information. The Station Properties dialog appears, where you can change station properties and add new stations manually.

Tip - To import station information from text files, use the System Properties dialog, which is available using the main menu command File > System Properties.