Enabling the Data Logger module

Once the Data Logger module has been configured and sensor information has been added to the module, it is necessary to enable the module.

Enabling the module

For enabling the module and to start reading in the data from the data file, do one of the following:

• In the Tree view, right-click the module name to open its shortcut menu. Select the Enable File Import command.
• Using the Data Logger properties, go to the File category / Enable property and set it to Yes.

Once enabled, the Data Logger icon in the tree view will switch to .

Disabling the module

For disabling the module, thus stopping the reading of the data file, do one of the following:

• In the Tree view, right-click the module name to open its shortcut menu. Select the Disable File Import command.
• Using the Data Logger properties, go to the File category / Enable property and set it to No.

In the disabled state, no data will be retrieved for this Data Logger module. The Data Logger icon will switch to .